4th Floor, 4 Tabernacle Street London EC2A 4LU

Raspbian Pi Compute Module – Delete Current Image

Heading Sub Title

Windows Setup

  1. Download the Windows Raspberry Pi Compute Module Boot Loader: https://github.com/raspberrypi/usbboot/raw/master/win32/rpiboot_setup.exe
  2. Install the RPI Boot Setup file
  3. With the board powered off, ensure the USB Boot jumper link is enabled. 
  4. Attach the Desktops USB to the ‘Micro USB Slave’ port
  5. Attach the micro USB power supply to ‘Power In’ to power up the board
 
The board will now power up and boot!
Image121

Heading Sub Title

Initialise the Compute Board

6. Right click RPi Boot and ‘Run as an Administrator’

Image21

7. If you do not see this screen and the board initialise, remove and re-attach the power supply, rebooting the board.

Image331

8. If succesfull – you will see this popup – Click CANCEL

Image21

Heading Sub Title

Delete the Volumes

Be extra careful doing this! You can corrupt and remove data on your desktop..

9. Open Windows Disk Management

10. Find the removable disk that is the Compute Module

If you are not sure, remove and re-attach the USB to be sure you are working with the correct disk

 

 

format1

11. Right click on each of the partitions and click ‘Delete Volume’

If you are not sure, remove and re-attach the USB to be sure you are working with the correct disk

delvol2

12. Continue to delete all the ‘Volumes’ until all are ‘Unallocated’

devvol3

13. Allocate a Volume – but do not format

createvol
createvol2
createvol3
devvol4

14. Now Complete – you have a RAW un-formatted but allocated volume – READY FOR A NEW IMAGE!