What communication protocols do you support?

The usual standards: BACnet (IP and MS/TP), Modbus (TCP and RTU), SNMP, LonWorks and M-Bus. We also spend a lot of time on proprietary APIs and the older vendor protocols that never made a brochure.

Can you integrate legacy systems without replacing hardware?

Yes. Legacy modernisation is a large part of the job. Gateways and protocol translation pull data off older plant into modern platforms, without a rip-and-replace you cannot afford.

Do you offer post-integration support?

Yes. 24/7 packages built for critical infrastructure: remote monitoring, emergency response, and regular health checks aimed at 99.99% uptime.

How do you handle security in integrations?

Air-gapped architectures where the site needs them, encrypted channels, and we stay inside ISO 27001 and IEC 62443 for industrial control. Security is not a slide at the end.

What is the typical timeline for an integration project?

It depends on complexity and scale. A mid-sized facility is typically 4 to 12 weeks, covering discovery, design, deployment and validation.

Do you work with specific hardware vendors?

We are vendor-agnostic MSI integrators. Deep time on Schneider, Siemens, Honeywell and Johnson Controls — but the brief is your mix of hardware, not a preferred catalogue.

DATACENTER INTEGRATION SERVICES

Integration when your systems will not talk

We specialise in connecting building management systems (BMS) and power management systems (PMS). Protocol-level work: getting those systems talking across the hall, not a slide about “unity”.

Specialised in Schneider EcoStruxure & Siemens Desigo

Certified Tridium Niagara Framework Experts

Integration with Delta InfraSuite & Johnson Controls Metasys

Explore Services

System Unity

One control plane over hardware that was never meant to share a room.

Data Integrity

Normalisation that holds across the protocols you actually run.

Real-time Ops

Low-latency monitoring on plant that cannot wait for a batch job.

Vendor & Protocol Expertise

Integration against the platforms and protocols that actually show up in a live hall.

Schneider EcoStruxure Integration

EcoStruxure Building Operation wired in for energy, power monitoring and the day-to-day running of the facility — not a screenshot integration.

Siemens Desigo Integration

Desigo CC connected for building management: HVAC, lighting and fire, in the same picture as the rest of the hall.

Tridium Niagara Framework

Niagara used the way it is meant to be used: mixed systems and devices on one interoperable platform, whoever made the box.

Delta InfraSuite Integration

DCIM integration so power, cooling and environmental performance are monitored together, not in three consoles.

Johnson Controls Metasys

Metasys building automation brought into the same operational view — quieter plant, fewer surprises, less waste.

Protocol Translation & Gateways

Bridges between BACnet, Modbus, SNMP and the proprietary legacy that still runs half the room, so the data actually moves.

Multi-Vendor System Validation

Testing that mixed hardware and software will hold together — interoperability and stability, proven, not assumed.

Enterprise Security Compliance

Security and compliance on the control systems that run the hall, so a cyber issue is not the first time anyone looked.

Environments We Serve

Integration shaped to the hall you have, from a corporate room to a hyperscale campus.

Hyperscale Datacenters

Large halls that need automated, efficient management across thousands of racks — not a tool built for a comms cupboard.

Enterprise Facilities

Corporate-owned rooms where security, reliability and keeping the business running are the brief, not an afterthought.

Multi-Tenant Environments

Colocation that needs metering that flexes, tenant management, and visibility that does not leak between cages.

Legacy System Modernisation

Ageing plant given a modern monitoring face, without ripping out the hardware that still works.

Critical Infrastructure

Government and financial sites that cannot take downtime, and will not accept a single path through the system.

5+Years proven experience

200+Successful integrations

99%System reliability rate

24/7Support coverage

Our Integration Process

Slow where it needs to be slow. Built for rooms that cannot take a surprise outage.

System Discovery & Protocol Analysis

We audit what is already there — hardware, protocols, the points that have to join — and write a roadmap from that, not from a template.

Integration Architecture Design

Engineers design how BMS, PMS and DCIM will actually exchange data, securely, at the scale the site will grow to.

Security & Compliance Preparation

Industry-standard security on every integration point, checked against the compliance you already owe (ISO 27001, and the rest).

Phased Integration Deployment

Roll-out in controlled phases so risk stays small and critical operations keep running.

Performance Validation & Documentation

Every signal and control tested, then the as-built pack and operator training handed over — not a wiki page and a wave.

Real World Use Cases

The messy rooms, not the brochure ones.

Hyperscale Datacenter Consolidation

Cooling and power management across 500k+ sq ft, brought into one command centre — not five vendor screens.

Legacy System Modernisation

Twenty-year-old chillers and generators talking to modern cloud analytics, through custom gateways, without a forklift upgrade.

Multi-Vendor Environment Management

A single pane for Schneider PDUs, Siemens BMS, and the mixed environmental sensors that never came from one catalogue.

Power System Integration

UPS and generator status at microsecond-level, live — so you see a failure coming, not after the transfer.

Frequently Asked Questions

Common questions about our BMS & PMS integration services.

Ready to get the plant talking?

Speak to engineering. We will audit what you run today, not a greenfield fantasy.

Get in Touch